DB DVA KS10 ACTIVE SUBWOOFER

Use it in a compact PA system, on a pole, ground stacked or flown in a DVA K5 array, this active sub is the most versatile low-end bin of the DVA series.

The semi horn loaded subwoofer DVA KS10 is equipped with a single 18" woofer driven by a Class-D Digipro@G3 power amp delivering 2000W Peak and reaching 134 dB SPL. Maximum versatility is granted by a stereo input/output balanced pre-amp.  Crucially, KS10 can be used as a compact PA system (together with DVA K5 on a speaker pole) or ground stacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder allows to apply up to 4.5 ms of delay, with 0.5 ms speps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz. 

SPECIFICATIONS

• Speaker Type: Active Semi-horn loaded Flyable Subwoofer
• Frequency Response [- 10 dB]: 41 Hz - 120 Hz
• Max SPL: 134 dB
• Directivity: Omnidirectional
• LF: 18 "
• Voice Coil LF: 4 "
• Amp Technology: Digipro® G3
• Amp Class: Class D
• RMS Power: 900 W
• Peak Power: 1800 W
• Cooling: Convection
• Power Supply: 900 W SMPS with auto range PSU
• Controller: DSP 56 Bit
• AD/DA Converter: 24 Bit / 48 KHz
• Limiter: Dual Active Multiband RMS, Peak, Thermal
• Crossover Frequency LF-HF: 90, 120 Hz (selectable)
• Slope LF-HF: 24 dB/Octave
• Input Section: 2X XLR Balanced
• Output Section: 2x XLR Balanced
• Power Sockets: 1 x Powercon In + 1 x Powercon Out
• Controls:
• • 1 x Input Sensitivity Rotary Switch
  • 1 x DSP Rotary (up to 4.5 ms on-board)
  • 1 x Polarity Inversion Switch (0°-180°)
  • 1 x X-Over Frequency Switch (90 Hz, 120Hz)
  • 1 x Output Mode Switch (Link - X-Over)
• Housing: Multiplex plywood
• Handles: 2x Side
• Pole Mount: 1x M20 on top
• Rigging Points: 2x Pick Points on top to fix DRK 10/20 rigging frames
• Width: 515 mm (20.27 in)
• Height: 640 mm (25.19 in)
• Depth: 720 mm (28.34 in)
• Weight: 43.4 kg (95.69 lbs)